FEAT CRAFT KSXH-26B

Soldering Fume Extractor

KSXH-26B soldering fume extractor Features:

● light weight, easy to operate

● Adjustable flexible POM suction arm

● High-power DC brush-less motor

● Multi-level-filtration,cotton filter, HEPA filter and activated carbon filter

● Long service life, low noise, large air flow

KSXH-26B soldering fume extractor Introduction:

   KSXH-26B soldering fume extractor Small but powerful–CE & RoHS certificated KSXH series fume extractor creates a powerful 260 cubic meter airflow to exhaust and purify air, suitable for small soldering station and home DIY. The compact size can be stuffed under the table and won’t hinder your leg free. Its flexible POM suction arm can be disassembled and shortened at any time.

Parameters:

Options & Accessories:

1.2m to 3m suction arm

Frequency converter

Activated carbon filter

Application:

Light welding activities

Steel or stainless steel wedling

TIG welding

Auto repair shops

Agricultural sector

Welding school

Technical college

Replacement steps of fume extractor carbon filter element

1、Before replacing the fume extractor carbon filter element, first close the electroplated ball valve, then press the flush button, wait about ten minutes, and let the system not be replaced until the pressure is relieved.

2、Open the nut connector on the right side of the membrane housing and pull out the water pipe.

3、Close the ball valve of the pressure barrel, open the upper nut joint, and lead the water pipe into an empty barrel or washing tank.

4、Hold the reverse osmosis membrane tube tightly by hand, then clamp the old reverse osmosis membrane with pliers (or tools), and pull it out of the membrane shell.

5、Insert the new reverse osmosis membrane prepared for replacement into the reverse osmosis membrane tube until one end of the two black circles reaches the bottom of the membrane shell, and then close the membrane cover.

6、Plug the water pipe and pipe plug (except the quick plug connector), and then close the nut connector on the right side of the membrane housing.

7、Open the electroplated ball valve. Let the filter run for more than two hours, and then connect the water pipe with the ball valve of the pressure barrel and open the ball valve of the pressure barrel after the filter system enters the normal water filtering state.

8、After replacing the fume extractor carbon filter element, pay attention to water testing. After opening the water, drain the water for 10 minutes, and observe whether the filter element has water seepage or leakage. If there is no water seepage or leakage, drain the water for 10 minutes before use; In case of water seepage and leakage, repeat the above operation to replace the filter element.

how to choose soldering fume extractor

Function and design

soldering fume extractor can generally be divided into five types: European flat panel machines, Chinese deep cavity machines, near suction machines and side suction machines. The European flat panel range hood has a beautiful appearance and a high net efficiency. Therefore, it is better to choose a flat range hood when choosing a soldering fuel extractor. If the space in the kitchen is limited, you can choose the range hood with suction and side suction, which are more economical.

Cleaning method

The soldering fume extractor can be divided into two types: the cleaning free type and the automatic cleaning type. The cleaning free type is more practical, and it does not need cleaning. You can directly use a rag to clean the soot. The price of automatic cleaning is quite expensive, and there is no difference between it and the one that does not need to be disassembled and cleaned, but it has an automatic cleaning function. So it is OK to buy the ones that are free of disassembly and washing.

Other performance

When purchasing soldering fume extractor, there are many factors to consider, such as product security. Now many fake and inferior products have low safety performance, so we should choose brands to buy them. In addition, it is better to choose the cooker hood with low noise and large air volume, so that the cooker hood will not appear very noisy. And the main choice is the main motor with large power and good-looking appearance, which does not take up space.

matters needing attention

1、It is better to buy an environment-friendly soldering fume extractor. Such a soldering fume extractor can effectively filter lampblack, purify lampblack, and turn it into air to be discharged from the kitchen.

2、Attention should also be paid to the installation of soldering fume extractor, because the size of kitchens in each family is different. It is better to measure the size of the kitchen before choosing a range hood, which can effectively prevent the size of the purchased range hood from being inappropriate.

DOWNLOAD DOCUMENT